Tube Radio Vintage

NEW – DELUXE – Easy to assemble – PC BOARD VERSION – Reproduction Knight Broadcaster kit. In addition to the gallery photos, this listing has extra photos with captions in the description body below, scroll through to see them all. NOTE: Kit comes with 9AU7 preamplifier tube, but NOT two 50C5 tubes. NOTE: This is the Deluxe PC board kit version, see our other listings for the original point-to-point wired version. Kit is available with a dual 115/230 volt primary transformer, for people in countries requiring 230 volts operation. Request this option if necessary, otherwise you may receive a 115 volt primary transformer. It is assumed that the unit(s) will be installed and operated by qualified personnel. Not for sale to, or use by minors. BLACK or GRAY case available, your choice, specify when ordering. This is our new, deluxe, PC (Printed Circuit) board version, reproduction kit of the Knight Broadcaster – Amplifier. You can learn more on the Internet if you are unfamiliar with it. High level inputs can be from a MP3 player, iPod, iPhone, cassette player, etc.. The kit also functions as a PA (Public Address) style audio amplifier, and has connections you can hook up a loudspeaker too. The audio input connection is by the included 3.5mm stereo jack, shown mounted on front panel. Stereo signals are mixed to mono on the board. A 2-pin screw terminal connector is located on the board for the PA loudspeaker connection. This version of the kit must be housed and operated in an enclosure, and comes with your choice of a black or gray plastic case. User must drill holes as necessary for construction. The kit is electrical equivalent to the original, with several minor changes. Our design includes a brand new, high quality, Triad safety isolation transformer. Domestic orders will receive a 110VAC primary transformer. International orders will receive a 110-220V dual primary version. The selenium rectifier has been replaced with a modern silicon diode. Kit comes with a prewound oscillator coil. Kit uses carbon film resistors. Kit includes several fixed capacitors for tuning, in place of a costly variable tuning capacitor. If desired, the user can install a variable or trimmer capacitor (not supplied), for variable frequency adjustment. Kit uses an external wire antenna, not shown connected in photos. Kit comes complete with all parts as shown. Design includes thermal protector in case of excess heat generation. Plastic case is not compromised, even with fan not running. In order to reduce costs, and improve operation, we have redesigned the circuit to use a less expensive 9AU7 preamplifier tube. We have also included a switch, to select between one or two sections of the preamplifier tube, to prevent overloading with high level signals, and improve signal to noise ratio. The pinout of the 9AU7 is the same as the original 12AX7, and the circuit can be easily modified to use that tube if desired. NOTE: This kit requires good electrical and mechanical building skills, and is recommended for advanced builders. Some simple mechanical modifications are required, such as cutting the metal potentiometer shaft to the correct length, drilling holes in the plastic cabinet, etc.. The original manual is supplied as a PDF and file on a CD-R. An addendum assembly notes file is supplied in RTF format. Note we do not supply copies of manuals. The kit is only for sale people with experience building and operated line powered devices. The kit must be operated under FCC Part 15 regulations at all times. This unit must only be operated with the supplied line isolation transformer. User assumes all liability. See our other listings for more Radio, Electronic and other RARE and UNIQUE items. Kit uses an external wire antenna, not shown in photos. Includes fan and thermal protector mounted on board. Easy PC board assembly, minimal wiring. Kit does NOT include 50C5 tubes. Your choice of black or gray case, specify when ordering. Brand new, Triad isolation transformer. No AC point to point wiring. All connections clearly marked on board. CD-R with original manual, and addendum instructions. See our other listings, for an original, point-to-point assembly design. For people interested in Heathkit projects, see our reproduction CR-1 crystal radio kits (standard and low cost versions), and our EXCLUSIVE PC board kits in the photo below. See our other listings for our EXCLUSIVE PC board kits. Powered by SixBit’s eCommerce Solution. The item “DELUXE Knight WIRELESS BROADCASTER vintage vacuum tube AM radio transmitter kit” is in sale since Thursday, November 18, 2021. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Radios\Tube Radios\1960-Now”. The seller is “ppelectronics” and is located in Middlesex, New Jersey. This item can be shipped worldwide.

• Country/Region of Manufacture: United States

NEW – DELUXE – Easy to assemble – PC BOARD VERSION – Reproduction Knight Broadcaster kit. In addition to the gallery photos, this listing has extra photos with captions in the description body below, scroll through to see them all. NOTE: Kit comes with 9AU7 preamplifier tube, but NOT two 50C5 tubes. NOTE: This is the Deluxe PC board kit version, see our other listings for the original point-to-point wired version. Kit is available with a dual 115/230 volt primary transformer, for people in countries requiring 230 volts operation. Request this option if necessary, otherwise you may receive a 115 volt primary transformer. BLACK or GRAY case available, your choice, specify when ordering. This is our new, deluxe, PC (Printed Circuit) board version, reproduction kit of the Knight Broadcaster – Amplifier. High level inputs can be from a MP3 player, iPod, iPhone, cassette player, etc.. The kit also functions as a PA (Public Address) style audio amplifier, and has connections you can hook up a loudspeaker too. The audio input connection is by the included 3.5mm stereo jack, shown mounted on front panel. Stereo signals are mixed to mono on the board. A 2-pin screw terminal connector is located on the board for the PA loudspeaker connection. This version of the kit must be housed and operated in an enclosure, and comes with your choice of a black or gray plastic case. User must drill holes as necessary for construction. The kit is electrical equivalent to the original, with several minor changes. Our design includes a brand new, high quality, Triad safety isolation transformer. Domestic orders will receive a 110VAC primary transformer. International orders will receive a 110-220V dual primary version. The selenium rectifier has been replaced with a modern silicon diode. Kit comes with a prewound oscillator coil. Kit uses carbon film resistors. Kit includes several fixed capacitors for tuning, in place of a costly variable tuning capacitor. If desired, the user can install a variable or trimmer capacitor (not supplied), for variable frequency adjustment. Kit uses an external wire antenna, not shown connected in photos. Kit comes complete with all parts as shown. Design includes thermal protector in case of excess heat generation. Plastic case is not compromised, even with fan not running. In order to reduce costs, and improve operation, we have redesigned the circuit to use a less expensive 9AU7 preamplifier tube. We have also included a switch, to select between one or two sections of the preamplifier tube, to prevent overloading with high level signals, and improve signal to noise ratio. The pinout of the 9AU7 is the same as the original 12AX7, and the circuit can be easily modified to use that tube if desired. NOTE: This kit requires good electrical and mechanical building skills, and is recommended for advanced builders. Some simple mechanical modifications are required, such as cutting the metal potentiometer shaft to the correct length, drilling holes in the plastic cabinet, etc.. The original manual is supplied as a PDF and file on a CD-R. An addendum assembly notes file is supplied in RTF format. Note we do not supply copies of manuals. The kit is only for sale people with experience building and operated line powered devices. The kit must be operated under FCC Part 15 regulations at all times. This unit must only be operated with the supplied line isolation transformer. Not for sale to, or use by minors. User assumes all liability. The following is an unsolicited customer testimonial -’I have the kit assembled and it worked perfect at first power on. I like the audio better with this kit as compared to the “original” Knight design. It seems to have more “highs” which I like. It is assumed that the unit(s) will be installed and operated by qualified personnel. See our other listings for more Radio, Electronic and other RARE and UNIQUE items. Kit uses an external wire antenna, not shown in photos. Includes fan and thermal protector mounted on board. Easy PC board assembly, minimal wiring. Kit does NOT include 50C5 tubes. Your choice of black or gray case, specify when ordering. Brand new, Triad isolation transformer. No AC point to point wiring. All connections clearly marked on board. CD-R with original manual, and addendum instructions. See our other listings, for an original, point-to-point assembly design. For people interested in Heathkit projects, see our reproduction CR-1 crystal radio kits (standard and low cost versions), and our EXCLUSIVE PC board kits in the photo below. See our other listings for our EXCLUSIVE PC board kits. Powered by SixBit’s eCommerce Solution. The item “DELUXE Knight WIRELESS BROADCASTER vintage vacuum tube AM radio transmitter kit” is in sale since Thursday, October 28, 2021. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Radios\Tube Radios\1960-Now”. The seller is “ppelectronics” and is located in Middlesex, New Jersey. This item can be shipped worldwide.

• Country/Region of Manufacture: United States

NEW – DELUXE – Easy to assemble – PC BOARD VERSION – Reproduction Knight Broadcaster kit. In addition to the gallery photos, this listing has extra photos with captions in the description body below, scroll through to see them all. NOTE: Kit comes with 9AU7 preamplifier tube, but NOT two 50C5 tubes. NOTE: This is the Deluxe PC board kit version, see our other listings for the original point-to-point wired version. Kit is available with a dual 115/230 volt primary transformer, for people in countries requiring 230 volts operation. Request this option if necessary, otherwise you may receive a 115 volt primary transformer. BLACK or GRAY case available, your choice, specify when ordering. This is our new, deluxe, PC (Printed Circuit) board version, reproduction kit of the Knight Broadcaster – Amplifier. High level inputs can be from a MP3 player, iPod, iPhone, cassette player, etc.. The kit also functions as a PA (Public Address) style audio amplifier, and has connections you can hook up a loudspeaker too. The audio input connection is by the included 3.5mm stereo jack, shown mounted on front panel. Stereo signals are mixed to mono on the board. A 2-pin screw terminal connector is located on the board for the PA loudspeaker connection. This version of the kit must be housed and operated in an enclosure, and comes with your choice of a black or gray plastic case. User must drill holes as necessary for construction. The kit is electrical equivalent to the original, with several minor changes. Our design includes a brand new, high quality, Triad safety isolation transformer. Domestic orders will receive a 110VAC primary transformer. International orders will receive a 110-220V dual primary version. The selenium rectifier has been replaced with a modern silicon diode. Kit comes with a prewound oscillator coil. Kit uses carbon film resistors. Kit includes several fixed capacitors for tuning, in place of a costly variable tuning capacitor. If desired, the user can install a variable or trimmer capacitor (not supplied), for variable frequency adjustment. Kit uses an external wire antenna, not shown connected in photos. Kit comes complete with all parts as shown. Design includes thermal protector in case of excess heat generation. Plastic case is not compromised, even with fan not running. In order to reduce costs, and improve operation, we have redesigned the circuit to use a less expensive 9AU7 preamplifier tube. We have also included a switch, to select between one or two sections of the preamplifier tube, to prevent overloading with high level signals, and improve signal to noise ratio. The pinout of the 9AU7 is the same as the original 12AX7, and the circuit can be easily modified to use that tube if desired. NOTE: This kit requires good electrical and mechanical building skills, and is recommended for advanced builders. Some simple mechanical modifications are required, such as cutting the metal potentiometer shaft to the correct length, drilling holes in the plastic cabinet, etc.. The original manual is supplied as a PDF and file on a CD-R. An addendum assembly notes file is supplied in RTF format. Note we do not supply copies of manuals. The kit is only for sale people with experience building and operated line powered devices. The kit must be operated under FCC Part 15 regulations at all times. This unit must only be operated with the supplied line isolation transformer. Not for sale to, or use by minors. User assumes all liability. The following is an unsolicited customer testimonial -’I have the kit assembled and it worked perfect at first power on. I like the audio better with this kit as compared to the “original” Knight design. It seems to have more “highs” which I like. It is assumed that the unit(s) will be installed and operated by qualified personnel. See our other listings for more Radio, Electronic and other RARE and UNIQUE items. Kit uses an external wire antenna, not shown in photos. Includes fan and thermal protector mounted on board. Easy PC board assembly, minimal wiring. Kit does NOT include 50C5 tubes. Your choice of black or gray case, specify when ordering. Brand new, Triad isolation transformer. No AC point to point wiring. All connections clearly marked on board. CD-R with original manual, and addendum instructions. See our other listings, for an original, point-to-point assembly design. For people interested in Heathkit projects, see our reproduction CR-1 crystal radio kits (standard and low cost versions), and our EXCLUSIVE PC board kits in the photo below. See our other listings for our EXCLUSIVE PC board kits. Powered by SixBit’s eCommerce Solution. The item “DELUXE Knight WIRELESS BROADCASTER vintage vacuum tube AM radio transmitter kit” is in sale since Thursday, September 30, 2021. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Radios\Tube Radios\1960-Now”. The seller is “ppelectronics” and is located in Middlesex, New Jersey. This item can be shipped worldwide.

• Country/Region of Manufacture: United States

NEW – DELUXE – Easy to assemble – PC BOARD VERSION – Reproduction Knight Broadcaster kit. In addition to the gallery photos, this listing has extra photos with captions in the description body below, scroll through to see them all. NOTE: Kit comes with 9AU7 preamplifier tube, but NOT two 50C5 tubes. NOTE: This is the Deluxe PC board kit version, see our other listings for the original point-to-point wired version. Kit is available with a dual 115/230 volt primary transformer, for people in countries requiring 230 volts operation. Request this option if necessary, otherwise you may receive a 115 volt primary transformer. BLACK or GRAY case available, your choice, specify when ordering. This is our new, deluxe, PC (Printed Circuit) board version, reproduction kit of the Knight Broadcaster – Amplifier. High level inputs can be from a MP3 player, iPod, iPhone, cassette player, etc.. The kit also functions as a PA (Public Address) style audio amplifier, and has connections you can hook up a loudspeaker too. The audio input connection is by the included 3.5mm stereo jack, shown mounted on front panel. Stereo signals are mixed to mono on the board. A 2-pin screw terminal connector is located on the board for the PA loudspeaker connection. This version of the kit must be housed and operated in an enclosure, and comes with your choice of a black or gray plastic case. User must drill holes as necessary for construction. The kit is electrical equivalent to the original, with several minor changes. Our design includes a brand new, high quality, Triad safety isolation transformer. Domestic orders will receive a 110VAC primary transformer. International orders will receive a 110-220V dual primary version. The selenium rectifier has been replaced with a modern silicon diode. Kit comes with a prewound oscillator coil. Kit uses carbon film resistors. Kit includes several fixed capacitors for tuning, in place of a costly variable tuning capacitor. If desired, the user can install a variable or trimmer capacitor (not supplied), for variable frequency adjustment. Kit uses an external wire antenna, not shown connected in photos. Kit comes complete with all parts as shown. Design includes thermal protector in case of excess heat generation. Plastic case is not compromised, even with fan not running. In order to reduce costs, and improve operation, we have redesigned the circuit to use a less expensive 9AU7 preamplifier tube. We have also included a switch, to select between one or two sections of the preamplifier tube, to prevent overloading with high level signals, and improve signal to noise ratio. The pinout of the 9AU7 is the same as the original 12AX7, and the circuit can be easily modified to use that tube if desired. NOTE: This kit requires good electrical and mechanical building skills, and is recommended for advanced builders. Some simple mechanical modifications are required, such as cutting the metal potentiometer shaft to the correct length, drilling holes in the plastic cabinet, etc.. The original manual is supplied as a PDF and file on a CD-R. An addendum assembly notes file is supplied in RTF format. Note we do not supply copies of manuals. The kit is only for sale people with experience building and operated line powered devices. The kit must be operated under FCC Part 15 regulations at all times. This unit must only be operated with the supplied line isolation transformer. Not for sale to, or use by minors. User assumes all liability. The following is an unsolicited customer testimonial -’I have the kit assembled and it worked perfect at first power on. I like the audio better with this kit as compared to the “original” Knight design. It seems to have more “highs” which I like. It is assumed that the unit(s) will be installed and operated by qualified personnel. See our other listings for more Radio, Electronic and other RARE and UNIQUE items. Kit uses an external wire antenna, not shown in photos. Includes fan and thermal protector mounted on board. Easy PC board assembly, minimal wiring. Kit does NOT include 50C5 tubes. Your choice of black or gray case, specify when ordering. Brand new, Triad isolation transformer. No AC point to point wiring. All connections clearly marked on board. CD-R with original manual, and addendum instructions. See our other listings, for an original, point-to-point assembly design. For people interested in Heathkit projects, see our reproduction CR-1 crystal radio kits (standard and low cost versions), and our EXCLUSIVE PC board kits in the photo below. See our other listings for our EXCLUSIVE PC board kits. Powered by SixBit’s eCommerce Solution. The item “DELUXE Knight WIRELESS BROADCASTER vintage vacuum tube AM radio transmitter kit” is in sale since Saturday, August 28, 2021. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Radios\Tube Radios\1960-Now”. The seller is “ppelectronics” and is located in Middlesex, New Jersey. This item can be shipped worldwide.

• Country/Region of Manufacture: United States